Shree Vikas Metal Corporation
Bhuleshwar, Mumbai, Maharashtra
GST No. 27AAOFS4984K1ZA
TrustSEAL Verified
Call 0804861906053% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 100 Kg |
| Usage/Application | Air Condition |
| Size | 15 mm |
| Brand | As per requirement |
| Place Of Origin | Mumbai |
| Thickness | 15 mm |
Product Details:
| Usage/Application | Industrial |
| Size | 1 |
| Brand | Shree Vikas Metal |
| Single Piece Length | 3-12 m |
| Shape | Round |
Product Details:
| Material | Copper |
| Alloy | With Alloy |
| Length | 3-6 m |
| Application | AC |
Product Details:
| Usage/Application | Medical Gas Copper Pipe |
| Size | As Per requirement |
| Type | As Per requirement |
| Place Of Origin | Mumbai |
| Thickness | As Per requirement |
| Single Piece Length | 3 meter, 6 meter, 18 meter |
| Size/Diameter | As Per requirement |
| Material | Copper |
Product Details:
| Type | Seamless |
| Length | 3-6 m |
| Hollow Sections | Circular |
| Material | Copper |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Good reasons to choose and use copper for plumbing and heating systems:
Product Details:
| Diameter | 20-100 mm |
| Length | 2-4 meters |
| Shape | Round |
| Material | Copper |
Product Details:
| Shape | Round |
| Material | Copper |
| Alloy | With Alloy |
| Diameter | 6-25 mm |
Product Details:
| Usage/Application | As Per requirement |
| Size | As Per requirement |
| Type | As Per requirement |
| Place Of Origin | Mumbai |
| Unit Length | 6 m, 12 m, 18 m |
| Alloy Or Not | Is Alloy, Non Alloy |
Product Details:
| Shape | Round |
| Length | 4-6 meters |
| Type | Seamless |
| Material | Copper |
Product Details:
| Hollow Sections | Oval |
| Outer Diameter | 6mm to 150 mm |
| Wall thickness | 0.5 mm to 50 mm |
| Material | Copper |
| Material | Electrolytic Tough Pitch High Conductivity Copper (E.T.P.) - C101 | Fire refined, Tough Pitch, High Conductivity Copper (FHRC) - C102 | Deoxidized Copper Low Phosphorus | ||||||||||||||||||||||||||||||||||||||||||||||||
| Nominal Composition | Cu-Min. 99.9% | Cu - Min. 99.9% P - 0.004 Max As - 0.012 Max | Cu - 99.85% P - 0.01-0.015% 92 to 96 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Condition Tensile Strength (Kg/mm2) Elongation (5.65 SO Min) Hardness HV |
|
|
|
Product Details:
| Material | Copper |
| Application | Water Heater |
| Length | 1-4 m |
| Diameter | 12.7-73 mm |
| MET - GEM TYPE 1 | |
| S/T | is an integral extended surface tube having helical fins (19, 26,40 on the outside & designed primarily for shell & Tube heat Exchanger application, to increase efficiency and reduce case. |
| Duplex type S/T Truffin | This is available in the variety of combination like (copper finned tube over a steel liner, Admiralty finned tube over the cupro-nickel liner, Aluminium finned tube over an admiralty liner etc |
| MET - GEM TYPE-2 | |
| S/T Turbo-chill | Is an integral extended surface the having helical fins (19, 26, 40 ) on the outside & internal helical ridges on the inside to improve circulation, thus giving more balance outside to inside coefficient ratio & designed for boiling & condensing of hydrocarbons. |
| MET - GEM TYPE 3 | |
| H/F Truffin | Is an integral extended surface tube having high helical fins on the outside & designed primarily for application, which requires a high outside to inside surface area ratios such as heating or cooling gases |
| MET - GEM TYPE 4 | |
| L/C Turfin | Is a bimetallic extended surface tube with high integral fins, for lightweight and economy, finned on prime surface or liner tube was chosen for resistance to a specific corrosive environment. It has a high outside to inside surface area ration for heating or cooling gases. L/C turf in is available in any combination & in four types spirally wounded fin tubes. Plain type Crimped 'L' type Wire Wounded |
Product Details:
| Unit Length | 6-12 m |
| Material | Copper |
| Is It Rust Proof | Rust Proof |
| Hollow Section | Circular |